Model KAPPA 40 is a competition model for F5J/outruner category. The model has an electric drive which is provided by a 3-phase motor with rotating casing. This model is designed for thermal flying but it is suitable for recreational flying, too.
The wing is made of glass fabric and rohacell using sandwich technique. The main beam and all reinforcements are made of carbon fibres. The rudder and elevator are made of glass fabric and filled with rohacell core reinforced with carbon tubes. The fuselage / body consists of 2 parts – front nacelle and carbon tube. The front nacelle is made of glass fabric using compressed air which results in lower weight and maximum strength of all components. The wing contains 2 servo shafts for winglet and 2 servo shafts for lift flaps serving for rudder and elevator control.
Construction | CFK, GFK |
Wing span | 3 930 mm |
Area of the wing | 68,74 dm2 |
Wing profile | RG 15-mod. |
Fusalage lenght | 1 610 mm |
Model flight weight | 1290 g |
Model production weight | 850 g |
Motor | MEGA 16/25/4E |
Regulator | 50 A |
Bateries | LiPol – 3S/1100 mA |
Propeller | 12“/6“ |
Propeller cone | 38 mm |
Servos | 2x KST X 08, 4x KST 225 MG |
Reccomanded receiver | min. 7-kanál |
Gravity centre | 95 mm |
Winglet | 12/6 |
Lift force | 5/45 |
Elevator | 7/7 |
It is possible to deliver fully constructed model with fitted servos and electronics on request.